Asbestos management at work – a practical guide for businesses

Who’s responsible for managing asbestos at work, and what should you check before maintenance starts? This practical guide from Your Company Works explains how to choose the right asbestos survey, keep your register up to date and share the right information with contractors.

Asbestos management at work – a practical guide for businesses

A contractor arrives to run a cable through a ceiling. You have an asbestos survey on file, but does it cover the space above that ceiling? Who checks, and what happens if the survey leaves it unclear?

That’s where asbestos management can get difficult. Health and safety managers and business owners are often working with old reports, shared responsibilities and maintenance jobs that need to happen quickly. A few clear steps can help your team make safer decisions before work starts.

Why asbestos management can be challenging

If your building was built or refurbished before 2000, the Health and Safety Executive (HSE) advises assuming asbestos is present. It can be hidden above ceilings, inside walls or around pipework. When asbestos-containing materials are damaged or disturbed, they can release fibres. Breathing in those fibres can cause serious illnesses, including mesothelioma and asbestos-related lung cancer.

Three questions often come up in practice.

  • Who’s responsible? In Great Britain, the duty to manage asbestos in non-domestic premises sits under Regulation 4 of the Control of Asbestos Regulations 2012. Responsibility depends on who has obligations for maintenance or repair, or who controls the premises where there is no relevant contract or tenancy. A landlord and tenant can share the duty. Check the lease or maintenance agreement to see who is responsible for each part of the building.
  • What does the survey actually cover? A locked plant room or an inaccessible ceiling void may have been left out. Areas that could contain asbestos and were missed by the survey should be treated as containing it until they can be inspected.
  • Does everything containing asbestos need to come out? Materials in good condition that are unlikely to be disturbed can usually stay in place with regular condition checks. Give priority to damaged materials or those likely to be disturbed, and seek competent advice on what action is needed.

Four practical steps for managing asbestos at work

1. Check you have the right asbestos survey

A management survey helps you manage asbestos during normal use of the building, including routine maintenance. A refurbishment or demolition survey looks for hidden asbestos in the areas affected by the planned work. If a job involves opening up the building fabric, check whether the existing survey covers the exact area and scope of work before it starts. HSE strongly recommends using a UKAS-accredited asbestos surveying organisation.

2. Keep your asbestos register and management plan up to date

The asbestos register records where known or presumed asbestos is, what condition it’s in and which relevant areas were left uninspected. The asbestos management plan sets out who does what, when condition checks are due, how workers get the information they need and what to do if material is disturbed. Give each action an owner and a due date. Review the plan at least every 12 months, or sooner if circumstances change.

3. Make asbestos checks part of every relevant maintenance job

Build a simple check into your job request or contractor sign-in. Has the person doing the work seen the asbestos information for the exact area they’ll be working in? Share it before work starts and pause the job if there’s a gap in the survey that affects the work. Asbestos awareness training helps workers recognise and avoid the risk. Work that will disturb asbestos requires additional training and controls, and some work requires a licensed contractor.

4. Make it clear what to do if someone finds suspected asbestos

Give staff and contractors a named contact. If someone discovers or disturbs suspected asbestos, stop work immediately, keep others out of the affected area and tell the person in charge. Follow your site’s emergency procedure and get competent advice before the work resumes.

How Your Company Works can help with asbestos management

If you’d like a second pair of eyes on your arrangements, we can work alongside you through our Competent Person Support. We can review how your team uses its asbestos records, help you clarify who owns each action and make the checks part of your everyday maintenance and contractor procedures. We can also help you identify where specialist input is needed and keep your arrangements under review.

What good asbestos management looks like day to day

When a contractor arrives, your team knows where to find the current register, which information to share and when a job needs to pause for further checks. Condition checks have an owner and a due date. If something changes, everyone knows who to tell. Those routines help prevent accidental exposure and give managers a clearer picture of what needs attention next.

If you’re unsure where to start, bring one question to a free chat with Paula. We’ll talk through what you have in place and help you work out a practical next step. Book a free consultation.

Need practical support?

Want help applying this to your business?

Every business is different. If you would like a clear, proportionate view of what you need to do next, get in touch.

Make an enquiry
Keep reading

Related articles

View all articles